# Makefile.in generated by automake 1.7.3 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



srcdir = .
top_srcdir = ..

pkgdatadir = $(datadir)/freetds
pkglibdir = $(libdir)/freetds
pkgincludedir = $(includedir)/freetds
top_builddir = ..

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_triplet = i686-pc-linux-gnu
ACLOCAL = ${SHELL} /home/richard/Downloads/freetds-0.62.4/missing --run aclocal-1.7
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /home/richard/Downloads/freetds-0.62.4/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /home/richard/Downloads/freetds-0.62.4/missing --run autoconf
AUTOHEADER = ${SHELL} /home/richard/Downloads/freetds-0.62.4/missing --run autoheader
AUTOMAKE = ${SHELL} /home/richard/Downloads/freetds-0.62.4/missing --run automake-1.7
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS =  -D_FREETDS_LIBRARY_SOURCE -D_REENTRANT -D_THREAD_SAFE -DDEBUG=1 -Wall -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DISTCHECK_BUILD_FALSE = 
DISTCHECK_BUILD_TRUE = #
DOXYGEN = 
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EXEEXT = 
F77 = 
FFLAGS = 
HAVE_DOXYGEN_FALSE = 
HAVE_DOXYGEN_TRUE = #
INCAPPS_FALSE = #
INCAPPS_TRUE = 
INCODBC_FALSE = #
INCODBC_TRUE = 
INCPOOL_FALSE = #
INCPOOL_TRUE = 
INCSERVER_FALSE = #
INCSERVER_TRUE = 
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LDFLAGS = 
LIBICONV = 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /home/richard/Downloads/freetds-0.62.4/missing --run makeinfo
NETWORK_LIBS = 
OBJEXT = o
ODBC = 
ODBCINSTLIB = 
ODBCLIB = 
ODBCNODMLIB = 
ODBC_FALSE = 
ODBC_INC = 
ODBC_TRUE = #
PACKAGE = freetds
PACKAGE_BUGREPORT = 
PACKAGE_NAME = 
PACKAGE_STRING = 
PACKAGE_TARNAME = 
PACKAGE_VERSION = 
PATH_SEPARATOR = :
RANLIB = ranlib
READLINE_LIBS = -lncurses  -lreadline
SET_MAKE = 

# Converting DocBook to HTML (several small files)
# http://www.freebsd.org/tutorials/docproj-primer/x3132.html#AEN3140
# version: $Id: Makefile.am,v 1.43 2004/01/02 08:22:22 freddy77 Exp $
SHELL = /bin/sh
STRIP = strip
SYBASE_COMPAT_FALSE = 
SYBASE_COMPAT_TRUE = #
UNIXODBC_FALSE = 
UNIXODBC_TRUE = #
VERSION = 0.62.4
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = 
ac_ct_RANLIB = ranlib
ac_ct_STRIP = strip
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias = 
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = i686-pc-linux-gnu
host_alias = 
host_cpu = i686
host_os = linux-gnu
host_vendor = pc
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = /home/richard/Downloads/freetds-0.62.4/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
oldincludedir = /usr/include
prefix = /usr/local
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target_alias = 
tds_sysdep_int16_type = short
tds_sysdep_int32_type = int
tds_sysdep_int64_type = long long
tds_sysdep_intptr_type = int
tds_sysdep_real32_type = float
tds_sysdep_real64_type = double
TXT2MAN = $(srcdir)/txt2man
DOCDIR = doc/freetds-$(VERSION)
PRODUCT = FreeTDS
TARGET_DOCDIR = $(DESTDIR)$(datadir)/$(DOCDIR)

EXTRA_DIST = api_status.txt bcp.txt cap.txt getting_started.txt \
		policy.txt tds_layer.txt CodingStyle tds.html  \
		userguide.dsl.in userguide.sgml \
		freebcp.1 freebcp.txt tsql.1 tsql.txt  \
		$(DOCDIR)/userguide $(DOCDIR)/reference \
		images/important.gif images/note.gif images/tip.gif


man_MANS = freebcp.1 tsql.1
nobase_data_DATA = $(DOCDIR)/reference/index.html $(DOCDIR)/userguide/index.htm

DISTRIBUTED_UG_DIR = $(srcdir)/$(DOCDIR)/userguide

DISTRIBUTED_REF_DIR = $(srcdir)/$(DOCDIR)/reference

DISTCLEANFILES = $(DOCDIR)/userguide $(DOCDIR)/reference
subdir = doc
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/include/config.h
CONFIG_CLEAN_FILES =
DIST_SOURCES =

NROFF = nroff
MANS = $(man_MANS)
DATA = $(nobase_data_DATA)

DIST_COMMON = Makefile.am Makefile.in
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

man1dir = $(mandir)/man1
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(man1dir)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
	done
nobase_dataDATA_INSTALL = $(install_sh_DATA)
install-nobase_dataDATA: $(nobase_data_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(datadir)
	@list='$(nobase_data_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="$$p"; \
	  echo " $(nobase_dataDATA_INSTALL) $$d$$p $(DESTDIR)$(datadir)/$$f"; \
	  $(nobase_dataDATA_INSTALL) $$d$$p $(DESTDIR)$(datadir)/$$f; \
	done

uninstall-nobase_dataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nobase_data_DATA)'; for p in $$list; do \
	  f="$$p"; \
	  echo " rm -f $(DESTDIR)$(datadir)/$$f"; \
	  rm -f $(DESTDIR)$(datadir)/$$f; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	$(mkinstalldirs) $(distdir)/$(DOCDIR) $(distdir)/images
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(MANS) $(DATA)

install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am

distclean-am: clean-am distclean-generic distclean-libtool

dvi: dvi-am

dvi-am:

info: info-am

info-am:

install-data-am: install-data-local install-man install-nobase_dataDATA

install-exec-am:

install-info: install-info-am

install-man: install-man1

installcheck-am:

maintainer-clean: maintainer-clean-am

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-info-am uninstall-local uninstall-man \
	uninstall-nobase_dataDATA

uninstall-man: uninstall-man1

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	clean-local distclean distclean-generic distclean-libtool \
	distdir dvi dvi-am info info-am install install-am install-data \
	install-data-am install-data-local install-exec install-exec-am \
	install-info install-info-am install-man install-man1 \
	install-nobase_dataDATA install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-info-am uninstall-local uninstall-man uninstall-man1 \
	uninstall-nobase_dataDATA


$(DOCDIR)/userguide: $(DOCDIR)/userguide/index.htm

$(DOCDIR)/reference: $(DOCDIR)/reference/index.html

doc:  $(DOCDIR)/userguide $(DOCDIR)/reference

dist:	man

man:	freebcp.1 tsql.1

installdirs: 
	$(mkinstalldirs)	$(TARGET_DOCDIR)/userguide    \
				$(TARGET_DOCDIR)/reference    \
				$(TARGET_DOCDIR)/images

freebcp.1: freebcp.txt
	$(TXT2MAN) -P $(PRODUCT) -t $(PRODUCT) -r $(VERSION) $(srcdir)/freebcp.txt >.$@
	if test ! -s .$@; then echo 'unable to generate $@'; fi
	test -s .$@
	mv .$@ $@

tsql.1: tsql.txt
	$(TXT2MAN) -P $(PRODUCT) -t $(PRODUCT) -r $(VERSION) $(srcdir)/tsql.txt >.$@
	if test ! -s .$@; then echo 'unable to generate $@'; fi
	test -s .$@
	mv .$@ $@

# If we built the documentation ourselves, install that, 
# else if we have access to distributed documentation, install that.  
install-data-local: installdirs $(DOCDIR)/reference/index.html $(DOCDIR)/userguide/index.htm
	$(mkinstalldirs) $(DOCDIR)
	if test -r $(DOCDIR)/userguide ; then d=.; else d="$(srcdir)"; fi; \
	find $$d/$(DOCDIR)/userguide \( -type f -o -type l \) -exec \
		$(INSTALL_DATA) {} $(TARGET_DOCDIR)/userguide ';'
	if test -r $(DOCDIR)/reference ; then d=.; else d="$(srcdir)"; fi; \
	find $$d/$(DOCDIR)/reference \( -type f -o -type l \) -exec \
		$(INSTALL_DATA) {} $(TARGET_DOCDIR)/reference ';'
	find $(srcdir)/images -name \*.gif -exec \
		$(INSTALL_DATA) {} $(TARGET_DOCDIR)/images ';'

uninstall-local:
	rm -rf $(TARGET_DOCDIR)

clean-local:
	rm -rf userguide.dsl doc doxy.log userguide reference \
		dblib.api	\
		ctlib.api	\
		 odbc.api	\
		dblib.api.sgml	\
		ctlib.api.sgml	\
		 odbc.api.sgml   

# To make the userguide, export DOCBOOK_DSL to point to docbook.dsl.
$(DOCDIR)/userguide/index.htm: userguide.sgml  userguide.dsl.in api_status.txt
	sed -ne's!SYSTEM "docbook.dsl" CDATA!SYSTEM "${DOCBOOK_DSL}" CDATA!; p' \
		$(srcdir)/userguide.dsl.in > .userguide.dsl
	mv .userguide.dsl userguide.dsl
	$(mkinstalldirs) $(DOCDIR)/userguide
	touch $(DOCDIR)/userguide/t.htm
	rm -f $(DOCDIR)/userguide/*
	$(MAKE) dblib.api.sgml
	$(MAKE) ctlib.api.sgml
	$(MAKE) odbc.api.sgml
# if we're not using jade, copy the distribution's userguide
	if test -z "${DOCBOOK_DSL}" ; then \
		if test -r $(DISTRIBUTED_UG_DIR) -a ! -r $(DOCDIR)/userguide ; then \
			cp -R $(DISTRIBUTED_UG_DIR) $(DOCDIR); \
		fi; \
	fi
# try jade ...
	cd $(DOCDIR)/userguide && \
	if test -n "${DOCBOOK_DSL}" ; then \
		if test ! -r userguide.sgml; then ln -s ../../../$(srcdir)/userguide.sgml userguide.sgml; fi; \
		openjade -d ../../../userguide.dsl -t sgml userguide.sgml; \
		if test -L userguide.sgml; then rm userguide.sgml; fi; \
	fi
# if still no joy, create a stub
	if test ! -r $@ ; then \
		echo '<html><P>at <a HREF="http://www.freetds.org/userguide/">www.freetds.org</a></html>' 	\
		> .index.htm && \
		mv .index.htm $@; \
	fi
	test -f $(DOCDIR)/userguide/index.htm
	cd $(DOCDIR)/userguide && if test ! -L index.html ; then ln -s index.htm index.html; fi
# for convenience, create a link in the build directory
	if test -L userguide; then rm userguide; fi
	ln -sf $(DOCDIR)/userguide userguide

userguide: $(DOCDIR)/userguide/index.htm
reference: $(DOCDIR)/reference/index.html

$(DOCDIR)/reference/index.html: $(top_srcdir)/ChangeLog
	$(mkinstalldirs) $(DOCDIR)
	cd .. && $(MAKE) doxy 2> doc/doxy.log
# if "make doxy" doesn't create anything, try to copy the distributed manual's HTML
	if test -r $(DISTRIBUTED_REF_DIR)/index.html -a ! $@ ; then \
		cp -R $(DISTRIBUTED_REF_DIR) $(DOCDIR); \
	fi
# if we don't find the source, generate a stub
	$(mkinstalldirs) $(DOCDIR)/reference
	if test ! -r $@ ; then \
		cd $(DOCDIR)/reference && \
		echo '<html><P>at <a HREF="http://www.freetds.org/reference/">www.freetds.org</a></html>' 	\
			> .index.html &&  \
		mv .index.html index.html; \
	fi
# for convenience, create a link in the build directory
	if test -L reference; then rm reference; fi
	ln -sf $(DOCDIR)/reference reference

#
# The following sections generate API implementation reference tables as SGML "entities".
# The entities are used a little bit like include files in the UG, e.g.:  
#	<!ENTITY dblibapisgml SYSTEM "../../../dblib.api.sgml">
#
# and "dblibapisgml" is referred to later on:
#	
#	<sect1 id="dblib.api.summary">
#		<title>db-lib API Implementation Summary</title>
#		&dblibapisgml;
#	</sect1>
#
# This lets us use the api_status.txt document in our SGML.
#
dblib.api.sgml: dblib.api 
	echo '<table id="dblib.api"><title>db-lib API Implementation Summary</title>' > .dblib.api.head
	echo '<tgroup cols=5><thead><row> \
  		<entry>Category</> \
  		<entry>Microsoft name</> \
  		<entry>Sybase name</> \
  		<entry>Status</> \
  		<entry>Comments</> \
		</row></thead> \
		<tbody>' \
			> .tableheader
	sed -e' s!^dblib[	]!<row><entry>!; \
		s![	][	]*!</> <entry>!g; \
		s!$$!</></row>!; \
	      ' dblib.api \
			> .dblib.api.body
	echo '</tbody></tgroup></table>' > .dblib.api.tail
	cat .dblib.api.head .tableheader .dblib.api.body .dblib.api.tail >$@
	rm  .dblib.api.head .tableheader .dblib.api.body .dblib.api.tail

dblib.api: api_status.txt
	grep '^dblib' $(srcdir)/api_status.txt > .dblib.api
	test -s  .dblib.api
	mv .dblib.api dblib.api

ctlib.api.sgml: ctlib.api 
	echo '<table id="ctlib.api" colsep=0> \
		<title>ct-lib API Implementation Summary</title>' \
			> .ctlib.api.head
	echo '<tgroup cols=4><thead><row> \
  		<entry>Category</> \
  		<entry>Function</> \
  		<entry>Status</> \
  		<entry>Comments</> \
		</row></thead> \
		<tbody>' \
			> .tableheader
	sed -e' s!^ctlib[	]!<row><entry>!; \
		s![	]!</> <entry>!g; \
		s!$$!</></row>!; \
	      ' ctlib.api \
			> .ctlib.api.body
	echo '</tbody></tgroup></table>' \
			> .ctlib.api.tail
	cat .ctlib.api.head .tableheader .ctlib.api.body .ctlib.api.tail >$@
	rm  .ctlib.api.head .tableheader .ctlib.api.body .ctlib.api.tail

ctlib.api: api_status.txt
	grep '^ctlib' $(srcdir)/api_status.txt > .ctlib.api
	test -s  .ctlib.api
	mv .ctlib.api ctlib.api

odbc.api.sgml: odbc.api 
	echo '<table id="odbc.api"><title>ODBC API Implementation Summary</title>' \
			> .odbc.api.head
	echo '<tgroup cols=4><thead><row> \
  		<entry>Category</> \
  		<entry>Function</> \
  		<entry>Status</> \
  		<entry>Comments</> \
		</row></thead> \
		<tbody>' \
			> .tableheader
	sed -e' s!^odbc[	]!<row><entry>!; \
		s![	][	]*!</> <entry>!g; \
		s!$$!</></row>!; \
	      ' odbc.api \
			> .odbc.api.body
	echo '</tbody></tgroup></table>' \
			> .odbc.api.tail
	cat .odbc.api.head .tableheader .odbc.api.body .odbc.api.tail >$@
	rm  .odbc.api.head .tableheader .odbc.api.body .odbc.api.tail

odbc.api: api_status.txt
	grep '^odbc' $(srcdir)/api_status.txt > .odbc.api
	test -s  .odbc.api
	mv .odbc.api odbc.api
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
